Provided by CPE and Wiring Specilities 997->GM E38 engine harness will allow you to run ANY 58x Chevrolet LS based engine installed in a Porsche 997.1 ('05-'08) or 997.2 ('09-'12). This harness will install onto the engine and plug into the factory Porsche chassis connectors located on the passenger side of the engine bay along w/ the GM E38 PCM. The included header harness and CAN modulation box will replace and accept the factory Porsche DME connections to provide an 100% plug n' play application w/ FULL gauge support (i.e. - oil temp, speedometer, tachometer, coolant temp, oil PSI, and CEL) and factory functionality including ABS, PSM, PASM (if equipped), and A/C.
This harness has been designed around a stock LS3 engine so dependent on which 58x engine you run LS3 sensors/accessories may be needed. With this product you'll recieve the following ...
- (1) 997->GM E38 Engine Harness
- (1) 997->GM E38 DME Header Harness
- (1) 997->GM E38 CAN Modulation Box
NOTE:
These engine harnesses, header harnesses, and CAN modulation boxes are made to order w/ a lead time of SIX weeks and are non-refundable/non-returnable.
Your 997 main engine harness connectors (2-3 dependent on .1 or .2) will need to be mailed in/re-purposed for this product.
IF selecting '997.2 ('09-'12)' variant you'll need to mail in your factory Porsche DME to be re-purposed.
GM E38 PCM NOT included.