Provided by CPE and Wiring Specialties 996->GM E38 engine harness will allow you to run ANY 58x Chevrolet LS based engine installed in a Porsche 996.2 ('02-'04). This harness will install onto the engine and plug into the factory Porsche chassis connectors located on the passenger side of the engine bay along w/ the GM E38 PCM. The included header harness and CAN modulation box will replace and accept the factory Porsche DME connections to provide an 100% plug n' play application w/ FULL gauge support (i.e. - oil temp, speedometer, tachometer, coolant temp, oil PSI, and CEL) and factory functionality including ABS, PSM (if equipped), and A/C.
This harness has been designed around a stock LS3 engine so dependent on which 58x engine you run LS3 sensors/accessories may be needed. With this product you'll receive the following ...
- (1) 996->GM E38 Engine Harness
- (1) 996->GM E38 DME Header Harness
- (1) 996->GM E38 CAN Modulation Box
These engine harnesses, header harnesses, and CAN modulation boxes are made to order w/ a lead time of SIX weeks and are non-refundable/non-returnable.
Your 996 main engine harness connectors (2) will need to be mailed in/re-purposed for this product.
GM E38 PCM NOT included.